Evapo-Rust NZ  -  Phone:  +64 9 424 1792 / 021 420 120

Cooling System Flush Header

"Automotive Cooling System De-Rusting Agent"

Removes even deep rust, rust scale and calcium deposits from entire cooling system in three easy steps


Non-Toxic, Non-Corrosive, Non-Flammable

Will not clog or harm engines

Contains no Acids or Bases - pH 6.1

Based on our award winning Evapo-Rust™ rust removing technology, Thermocure™ - Cooling System Flush allows the user to easily and quickly remove rust from automotive engines, mechanical cooling and recirculating systems, and liquid delivery lines without the need for dismantling.

Thermocure™ - Cooling System Flush uses the latest technology in rust and corrosion removal to totally revitalize automotive cooling systems.

Thermocure™ - Cooling System Flush removes rust scale, lime (calcium), and other deposits readily built up in radiators, water pumps, water jackets, engine blocks and heads. Thermocure™ - CSF will not harm soldered joints, gaskets or seals. Rust and corrosion in cooling systems act like an insulator and cause vehicles to overheat. This product restores the engines ability to transfer heat to the coolant allowing the engine to run cooler.



Photo Cooling System Flush Containers

1 Litre $79.95          

Treats Cooling Systems with a capacity of up to 10 litres.
For Cooling Systems from 10 to 20 litres 2 bottles will be required.

DIRECTIONS: Drain coolant and flush cooling system. Add one litre of Thermocure™ and Fill with water. Drive the vehicle for 8-10 hours up to several days for extensive rust. You may drive the car normally during this period. Drain the cooling system and Flush twice with water. Refill with high quality coolant mixed to maufacturer's specification with water. DO NOT USE IN FREEZING TEMPERATURES.

 © 2013 Evapo-Rust NZ. All Rights Reserved. Terms / Privacy Policy